Click To Call(656) 269-5576Click To Get A Free Estimate
Honey colored travertine pool deck under a screened lanai at a FishHawk home

Stone-safe care for lanai and pool travertine

Travertine Sealing in FishHawk, FL

Ask for a free travertine sealing estimate in FishHawk, or call (656) 269-5576 today.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.00 a sq ft to clean, sand and seal
Call Now(656) 269-5576
Travertine

Who seals travertine in FishHawk, and how soon will I hear back?

A local contractor can seal the travertine at your FishHawk home, and you will hear back within 1 business day and usually much sooner. The estimate is free and carries no obligation. To start, call (656) 269-5576.

FishHawk travertine is natural stone, so it gets a different plan than concrete pavers: gentle cleaning, a breathable sealer and a test patch first. That plan protects the stone and keeps the color you picked. It covers pool coping, lanai floors and entry steps, which are the spots that see the most water and the most bare feet. Describe your pool deck or lanai when you ask for a free estimate.

Call (656) 269-5576

Pale travertine coping and deck beside a pool inside a FishHawk screen enclosure
The stone

Why does FishHawk travertine need its own sealing plan?

Travertine is a fresh-water limestone, formed when calcium carbonate drops out of mineral-rich water, and Wikipedia notes that its surface often shows pitted holes. Fresh stone can be anywhere from about 10 to 70 percent porous, which is why water, oil and pool chemicals sink in. A stone care company says that shows up as dark patches and stubborn stains. Ask a contractor how they treat the pores on your stone, or call (656) 269-5576.

Limestone also reacts to acid. A stone seller states plainly that a sealer does not stop acid etching, and that acid should never be used to lift marks from travertine, marble or limestone. A coat of sealer slows staining and makes cleanup easier, nothing more. To talk through what sealing can and cannot do, ask for a free estimate.

What is included

What is the travertine sealing process in FishHawk?

A visit follows five steps, and the first one is a look at the stone rather than a spray. Repairs come before cleaning, and cleaning comes before the sealer. To book a look, call (656) 269-5576.

1. Look and test

The contractor checks for loose coping, cracked or sunken stones, old sealer and stains, then tries the sealer on a small patch.

2. Repair

A paver company says sunken, shifted or broken stones and loose coping are fixed before anything is sealed.

3. Stone-safe wash

Low pressure and a cleaner made for natural stone. The same company says high pressure can damage travertine and wash out its joints.

4. Joints and holes

Joint sand goes in matched to the stone color. Chips, cracks and open pits can be filled with color matched material.

5. Seal and cure

A penetrating or enhancing coat goes on dry stone. The contractor tells you how long to stay off and when pool use can resume.

Sealer choice

Which sealer suits FishHawk travertine, penetrating or enhancing?

Pick penetrating for a natural look and enhancing for richer color. A penetrating sealer is described by a stone care company as the preferred kind because it soaks in with no film and shows little or no change once cured. An enhancing coat deepens the stone, and a paver company that works around FishHawk says glossy or enhancing finishes can feel slicker when wet. To see both on a test patch, ask for a free estimate.

Breathable matters too. Stone that holds moisture needs a coat that lets vapor out, which is why that paver company asks for a breathable product on natural stone. Ask the FishHawk contractor for the product name and finish in writing, since an HOA may want it. For questions, call (656) 269-5576.

What should never be used to clean FishHawk travertine?

Acids and hard pressure. A stone seller says to skip vinegar, lemon based cleaners and acidic descalers, and to avoid concentrated bleach and aggressive pressure washing as a routine method. A pH neutral cleaner made for stone is the safe route. If a bid says muriatic acid or a high pressure wand, ask why before you agree. To compare approaches, call (656) 269-5576.

Homeowner and contractor looking at a travertine sample beside a lanai door
Pool decks

Is a salt water pool harder on a FishHawk travertine deck?

It tends to be. Salt water splashes onto the deck, soaks in and dries into crystals that wear at the surface, according to a paver company serving the area. Sealing lowers how much salt the stone absorbs, and a fresh water rinse then carries more of it away. A stone seller adds that salt and strong pool chemicals should be kept off the stone, and that its own warranty excludes that damage. To plan around your pool, ask for a free estimate.

Most travertine here sits under screen enclosures or on lanai floors beside lakes and ponds. Shade and damp air let mildew settle into the holes and joints, and the screen keeps leaves and rain off only part of the day. Mention where the sun reaches the stone when you call (656) 269-5576.

How slippery is FishHawk travertine after sealing?

A natural finish is closest to bare stone, and a high gloss coat is the one to avoid near water. A stone seller points out that no paving is slip-proof, since water, algae, dirt and sealers all change traction. A paver company applies a non-skid additive in the final coat as an add-on, priced as its own line on the estimate. Ask for a test area first at your home. To add that to a quote, call (656) 269-5576.

Resealing

How often does FishHawk travertine need resealing?

Expect somewhere between 1 and 5 years. A stone care company says one to three years for home use, and a paver company serving the area says two to five, depending on sun, salt water and use. The splash test settles it: if water darkens the stone and soaks in instead of beading, the coat is thin. Have your stone checked, or ask for a free estimate.

New travertine can wait. A paver company says new construction often shows a white haze called efflorescence, and that installers suggest 60 to 90 days before sealing so it can surface first. Wikipedia describes efflorescence as salt carried to the surface by water, and adds that sealers cannot permanently prevent it. Give the install date of your FishHawk home when you call (656) 269-5576.

Pricing

What does travertine sealing cost in FishHawk?

Price starts with square footage, then the condition of the stone. A paver company that serves FishHawk lists about $1.75 to $3.00 per square foot to clean, sand and seal, and about $3.00 to $5.00 when stripping and full restoration are needed. Repairs to coping and loose stones are priced on top. For a number on your own stone, ask for a free estimate.

One note on pricing: no page read for this guide posts a travertine only rate, so the table below applies those two published figures to three sizes. Compare any bid with it, and for a written price call (656) 269-5576.

Stone areaTypical exampleClean, sand and seal at $1.75 to $3.00Full restoration with stripping at $3.00 to $5.00
250 sq ftLanai floor$438 to $750$750 to $1,250
500 sq ftPool apron and lanai$875 to $1,500$1,500 to $2,500
900 sq ftFull pool deck with a patio$1,575 to $2,700$2,700 to $4,500

No company page that was read lists a stand-alone rate for travertine, so the table is built from the two published pieces: a paver company serving FishHawk gives $1.75 to $3.00 per square foot to clean, sand and seal, and another page from the same company gives about $3.00 to $5.00 when old sealer has to be stripped and the surface fully restored. Natural stone often takes more careful hand work, so the contractor may price it differently after a look.

Get a Free Estimate

HOA

Does the HOA need to see my sealer choice?

Possibly. FishHawk Ranch is a planned community of more than 3,000 acres built in the 1990s, and a paver company that works there says many of its associations have rules on finishes and sand colors. The finish most likely to need approval is the wet look or color enhancer, while a natural finish changes the look least. Ask the contractor for a written scope with the product name. To start the paperwork, call (656) 269-5576.

The estimate

What should a FishHawk travertine estimate spell out?

A written estimate for travertine should answer the same questions every time. Use this list to read any bid, and to compare one FishHawk contractor with another. To have a bid written to it, ask for a free estimate.

  • The stone type and finish, tumbled or honed, filled or unfilled, so the sealer is matched to it
  • The measured square footage of the deck, lanai and coping, not a rounded guess
  • Which areas get repairs first, such as loose coping or cracked and sunken stones
  • The cleaner for the stone, named, with confirmation that no acid product goes on it
  • The washing method, low pressure only, for a surface that is soft and easy to pit
  • The sealer name and whether it is penetrating or enhancing, in writing for your HOA
  • A test patch at your home before the whole deck is coated
  • Whether a non-skid additive is wanted around the pool, listed as its own line
  • Pool and lanai prep, such as covering the water and the screen enclosure frame
  • Drying time, plus the plan if an afternoon storm moves the date
  • How long to stay off the stone, and when the pool can be used again
  • The price in dollars, with the repair items listed apart from the sealing

Anything missing from a bid is worth a question. To talk it over, call (656) 269-5576.

Photos

What does sealed travertine look like at a FishHawk lanai?

Freshly sealed paver driveway beside a travertine lanai floor
Sealed paver pool deck beside a travertine lanai floor
Sealed paver patio behind the home beside a travertine lanai floor
Sealed paver walkway to a front door beside a travertine lanai floor
Close view of freshly sealed pavers beside a travertine lanai floor
Paver area with one cleaned half beside a dirty half beside a travertine lanai floor
Contractor cleaning pavers beside a travertine lanai floor
Contractor sealing or sanding pavers beside a travertine lanai floor
Questions

What do FishHawk homeowners ask about travertine sealing in FishHawk?

Should you seal travertine around a FishHawk pool?

Usually yes. Travertine is a porous stone, and a pool deck gets wet, chlorinated or salty, and walked on barefoot every day. A sealer cuts down how much water and oil the stone drinks in. It will not make the stone stain-proof, so wipe up spills when you can. To plan your deck, call (656) 269-5576.

How often do you need to reseal pavers in Florida?

The two sources read give 1 to 3 years and 2 to 5 years. Sun, salt water and daily use decide where your stone lands. Water that soaks in and darkens the stone instead of beading is the sign to reseal.

What do professionals use to seal pavers and travertine in FishHawk?

A breathable penetrating sealer is the usual choice for travertine. A stone care company calls it the preferred type because it soaks in without leaving a film, and says topical coats can peel or flake. An enhancing finish is the other route, for richer color.

What is the right cleaner for FishHawk travertine floors?

A neutral, stone-safe cleaner made for natural stone. One pool deck stone supplier says to avoid vinegar, lemon cleaners and acid descalers, and a paver company says high pressure can pit the surface and wash out the joints. Ask the contractor which cleaner goes on yours.

Does sealing travertine stop acid damage in FishHawk?

No. A stone seller states that a sealer does not prevent acid etching, and a stone company says acidic products wear the stone and the sealer. That is why an acid based rust remover has no place on travertine.

Will a sealer fill the holes in my FishHawk travertine?

No. Small open holes are natural in tumbled travertine, including the lanai kind, and the surface often looks pitted. Where a contractor fills them, color matched material goes in before sealing, and filled or unfilled is a choice made during cleaning.

Is sealed travertine slippery around a FishHawk pool?

It can be. A glossy coat or algae makes wet stone slick, and no paving is slip-proof. A natural finish tends to feel closest to bare stone, and a paver company offers a non-skid additive in the last coat for an added charge.

Does my FishHawk HOA need to approve a travertine sealer?

Check with your association. A paver company in this area says many communities there have rules on finishes and sand colors, and that a wet look or color enhancer is the choice most likely to need approval. A natural finish changes the look the least.

Can travertine be sealed during the summer rains?

It can be, but the contractor needs a dry window. Tampa Bay's wet season runs from late May through October, with storms most afternoons. Stone that has not fully dried should wait, so expect your date to move. To ask about a schedule, ask for a free estimate.

Anything about FishHawk travertine not answered here is worth a call to (656) 269-5576.

Service area

Which nearby communities can get travertine sealing?

A local contractor serves FishHawk and the places around it, from Lithia in the east to the city neighborhoods farther west around Tampa Bay. Every one has its own page. To confirm your street, call (656) 269-5576.

Ready to protect the stone around your FishHawk pool?

Describe the travertine and where it sits. A local contractor answers within 1 business day, often far sooner.

Call (656) 269-5576

Free, no obligation