FAQ
Frequently Asked Questions
What does it cost to seal pavers in FishHawk?
A paver company that serves FishHawk lists about $1.75 to $3.00 per square foot to clean, sand and seal. At those rates a 600 square foot driveway runs about $1,050 to $1,800. Stripping old sealer and resetting sunken pavers cost extra. To price your own pavers, ask for a free estimate.
How often should pavers be sealed in Florida?
Plan on every two to five years. A paver company serving FishHawk gives that range, and Unilock, a paver maker, says three to five. Full sun, sprinkler overspray and car traffic push toward the short end. To have yours checked, call (656) 269-5576.
Is it good to seal pavers in Florida?
Yes, when the color has faded, the joints have emptied or green growth has set in. Unilock lists deeper color, stain protection and easier cleaning as the main gains. It is also a repeat cost, so ask how soon your surface will need another coat. To see if yours are ready, ask for a free estimate.
What are the downsides of sealing pavers?
The main one is the repeat cost, since Unilock says a coat needs redoing every three to five years. A high gloss finish can also be slippery when wet, and Unilock calls a matte sealer the safer pick. To talk through the trade-offs, call (656) 269-5576.
Does my FishHawk HOA need to approve paver sealing?
Check with your association before any work starts. FishHawk Ranch is a planned community of several villages, and paver companies in the area say its HOAs review exterior work. Ask the contractor to put the product name and finish in writing for your request. To start, ask for a free estimate.
Do pavers need to be cleaned before they are sealed?
Yes. Unilock advises cleaning first, since sealer makes any leftover stain stand out and locks in the dirt under it. The wash and the new joint sand come before the coat, which is why one price usually covers all three.
Can I seal my own pavers in FishHawk?
You can, but the first try is easy to get wrong. Unilock says sealer can be tricky to apply, and Western Interlock warns that skipped steps, hot pavers or wet pavers leave a mess. A contractor who does it weekly has the timing down.
How long does paver sealer take to dry?
Plan on about a day before anyone walks on it. Western Interlock says to wait at least 24 hours for foot or car traffic, and Unilock puts a full cure at up to 48 hours of dry weather. Keep the sprinklers off until then.
Contact Us Today for a Free Estimate
A contractor who serves your area can answer any other question.
Free, no obligation
